green sand mold
英 [ɡriːn sænd məʊld]
美 [ɡriːn sænd moʊld]
网络 湿型; 湿砂模
双语例句
- Reasons of Defects in Light Green Sand Mold Casting and its Preventive Measures
湿型铸造小件产品缺陷产生的原因与防止措施 - It was pointed out that the strength of molding sand and compactness of sand mold is the key factors influencing the rigidity of green sand mold under normal temperature.
指出型砂强度和砂型的紧实程度是常温下影响湿砂型刚度的主要因素。 - A New Additive of Correcting Metal Penetration for Green Sand Mold Casting
湿型铸造新型防粘砂添加剂 - The influence of the thickness of the green sand mold on the casting stress was also studied. The results indicate that the thickness of the green sand mold in the contact element model could be simplified on some degree.
同时研究了在砂型铸造中湿型砂厚度对应力结果的影响，表明接触单元模型可以进行一定的简化从而减少计算量。 - Study on Coating of Sodium Silicate Alumina Clay for Aluminium Alloy Casting in Green Sand Mold
铝合金铸件湿砂型水玻璃&铝钒土涂料的研究 - NUMERICAL SIMULATION OF PNEUMATIC MOULDING PROCESS BY DISCONTINUOUS DEFORMATION ANALYSIS A New Additive of Correcting Metal Penetration for Green Sand Mold Casting
采用非连续变形分析对空气冲击湿砂造型过程的数值模拟 - Answers to Some Molding Sand-Related Questions in Green Sand Mold Iron Castings Production(ⅲ)& Questions related with blowhole, sand and slag inclusion defects
湿型铸铁件生产中一些与型砂有关的问题解答（三）&与气孔、砂孔、渣孔缺陷有关的问题 - The experience of cast Mg alloy in graphite green sand mold was summarized and its casting characteristics were analyzed.
总结了采用石墨砂湿型铸造镁合金的经验，分析了镁合金铸造的特点。 - Research of Starch Binder used in the Green Sand Mold
有关潮模铸型用淀粉粘结剂的初步探讨 - Alcohol Radical Coating for Clay Green Sand Mold and It's Application
粘土砂湿型用醇基涂料及其应用 - Green Sand Mold Casting of Lengthy Casting
毛木耳绿霉病初报细长件的湿型铸造 - This research mainly explores the production of steel castings with air flush molding green sand and the improvement of its character from the molding sand recipe and mold sand system control.
本研究主要探讨了用气冲造型湿型砂来生产铁路钩缓铸钢件，从型砂的配方和型砂系统的控制等几个方面来优化其性能。 - Test and Application of Green Sand Mold Coating in thin-plate Iron castings
薄壁铸铁件湿型铸造涂料的实验与应用 - Study of Mix Starch Binders for the Green and Dry Sand Mold
有关潮模及烘干铸型用混合型淀粉粘结剂的研究 - Experimental results show that moisture evaporated and moisture condensed constant are related to bulk density initial moisture content in the green sand mold and mean metal-mold interface temperature.
实验结果表明，湿型中的水分蒸发系数和水分凝聚系数与砂型密度、初始水分含量和铸件一铸型界面平均温度有关。 - The green sand mold with even density and proof of the impact of liquid metal is one of the critical factors in the production of quality casting.
紧实度均匀、能抵抗金属液体冲击的合格砂型是保证铸件质量的关键因素之一。 - Industrial Test of Groove Linear Board of Green Sand Mold Ball Grinding Machine
湿型球磨机槽型衬板工业性试验 - The mold hardness under different vacuum degree was tested. The results showed that the mold hardness of EPC process was higher than that of green sand mold and was more uniformly distributed.
不同真空度下消失模铸型硬度的测试结果表明，消失模铸型的硬度高于普通湿型砂铸型，并且硬度分布更均匀。 - The Prevention of Lift Core Defects of Green Sand Mold Steel Casting
湿型铸钢件偏芯缺陷的防止 - The medium chromium white cast iron has been pouring by green sand mold, and the effect of Cr? Si? Mn?
应用湿砂铸型浇注中低铬白口铸铁，采用正交试验研究Cr、Si、Mn、Cu对铸态中低铬白口铸铁力学性能的影响。 - The factors influencing the rigidity of green sand mold during pouring were analyzed.
对影响湿砂型浇注时的刚度的各种因素进行了分析。 - Practice of Mg Alloy Casting in Green Graphite Sand Mold
镁合金应用石墨砂湿型铸造的实践 - Green manufacture is a developing trend in the industry production of the 21st century, and sodium silicate sand is the most possible mold sand to realize green casting.
绿色制造是21世纪工业生产的发展趋势，水玻璃旧砂是最有可能实现绿色铸造的型砂。